Page 1 656250 1963-1965 Ford Fairlane Rack & Pinion Kit Instructions # 8011570 Full refund will NOT be granted to any kits that are damaged
Page 2 656250 KIT CONTENTS: # Part Number Description Quantity 1 8011560 Rack and Pinion Unit w/bracket 1 2 621890 Rack and Pinion Hardware Kit 1
Page 3 656250 2. Remove front tires. Remove outer tie rod ends, cotter pins, and retaining nuts. Remove outer ends from spindle. 3. Remo
Page 4 656250 4. Remove the 2 retaining bolts on the idler arm assembly. Remove the idler arm and the rest of the steering linkage.
Page 5 656250 6. At the top of the column there is a bearing. On top of the bearing there is a snap ring to remove. Once it is removed slide the
Page 6 656250 10. From under the car locate the 4 bolts that retain the mounting blocks to the main mounting bracket. NOTE: DO NOT REMOVE THE
Page 7 656250 12. Install the flat washers and locknuts to the outside of the frame. Once the bracket is in the car hold it parallel to the ground
Page 8 656250 15. Next tighten up the pinch bolts to 40 ft lbs. making sure nothing is binding or rubbing when turning. Pay close attention to th
Page 9 656250 17. Next install the pressure and return line. Note the pressure line has the 1 female end on each end. That line runs to the lower
Comments to this Manuals