Unisteer 8010650-02 Chevy II/Nova Power Rack & Pinion K User Manual

pg. 1 655520 1962-67 Chevy II/Nova Power Rack & Pinion Kit Instructions # 8010650-01 and 8010650-02 Full refund will NOT be granted to any

pg. 2 655520 Kit Contents: # Part Number Description Quantity 1 8010640-01 Rack and Pinion Assembly 1 2 8021390 Steering Arm (LH) 1 3 8021400 St

pg. 3 655520 This kit is designed for 1962-1967 Chevy II’s and Novas, but the following provisions apply: BEFORE STARTING YOUR CAR MUST MEET THES

pg. 4 655520 Column and Steering Box Removal: If you are using the stock column: The stock column assembly consists of 3 different parts; the colu

pg. 5 655520 2. Place the four (4) stand offs (spacers) provided on the new motor mount bolts and hang the rack & pinion mounting bracket on

pg. 6 655520 5. Cut the column shaft off the steering box, about 2 inches above the steering box; this will allow you to more freely measure the

pg. 7 655520 Steering Shafts A steering shaft is required to make this kit work; a steering shaft is not included with this kit due to the varianc

pg. 8 655520 2. Establish a convenient location for the Remote Reservoir that is within reach of the lines. You will need two (2) ¼”-20 Bolts of

pg. 9 655520 Alignment Specs. Toe: 1/16 to 1/8 inch in Camber: ¼ degree positive Caster: 1.5 – 2 degree positive If you have any questi