Unisteer 8010920-01 Late 1967-70 Mustang Rack Kit User Manual

Page 1 655650 Late ’67-‘70 Mustang Rack Kit Instructions 8010830-01 & 8010920-01 Full refund will NOT be granted to any kits that are damaged

Page 10 655650 3. From under the car remove the gear box and shaft assembly, (all one piece.) 4. Place your column tube on a flat surface and mea

Page 11 655650 6. Install the brass bearing collar from the old steering shaft onto the new steering shaft and slide the new shaft through the col

Page 12 655650 WARNING, for 1970 model year ONLY 1970 Mustang Column Modification 1. Remove 4 bolts at firewall plate. 2. Remove lower plasti

Page 13 655650 7. Next you need to cut off the inner tube of the steering column tube. This is the tube that has the lever on it. Cut it off as cl

Page 14 655650 11. When that step is done you now need to measure down 1-3/4” from the flat surface of the bearing to the end of the steering shaft

Page 15 655650 If you have any questions or problems regarding this product please contact: UNISTEER® Performance Products 1555 Enterprise Parkway

Page 2 655650 KIT CONTENTS: # Part Number Description Quantity 1 8010810-01 Rack and Pinion Unit w/bracket 1 2a 8060710 Pump Assembly for Small Bl

Page 3 655650 Disassembly The first step is to disassemble and remove the stock steering linkage, steering box and column. 1. Disconnect steering

Page 4 655650 5. Once you have this done install the appropriate floor plate provided in your kit using the hardware provided. Slide the floor pla

Page 5 655650 7. Your rack has been shipped with the pressure and return line ports connected to it. You will need to install the pressure and re

Page 6 655650 9. You can now torque the mounting bolts for your rack to 65 ft. lbs. 10. Install the outer tie rod ends and tighten to 45 ft. lbs

Page 7 655650 11. The power steering pump is an easy install and comes with the pump brackets attached to it. If your car was equipped with power s

Page 8 655650 14. When your lines are connected and the top bolt on the pressure port is torque to 20 ft. lbs. You may top off the fluid in the res

Page 9 655650 WARNING: for Early 1967 model year ONLY Early 1967 Mustang Column Modification 1. The steering column tube needs to be modified