Unisteer 8001520 Corvette Manual Rack & Pinion Kit 1963 User Manual download pdf

Page 1 657080

’63-’82 Corvette Manual Rack & Pinion Kit Instructions

# 8001520

Full refund will NOT be granted to any kits that are damaged,

scratched, or altered in any fashion.

*ALTHOUGH THIS KIT IS FAIRLY SIMPLE TO INSTALL, SOME MODIFICATIONS

MAYBE NECESSARY.

*BEFORE STARTING INSTALLATION, PLEASE BE AWARE OF THE

MODIFICATIONS THAT ARE NEEDED TO INSTALL.

*ALSO BE AWARE THAT THERE ARE APPLICATION/PROVISIONS NEEDED IN

ORDER TO INSTALL. PLEASE READ ALL INSTRUCTIONS FIRST.

*DUE TO VARIABLES OUTSIDE OUR CONTROL THESE KITS MAY NOT FIT ALL

APPLICATIONS. ALSO, PLEASE VERIFY KIT WILL FIT YOUR APPLICATION

BEFORE ALTERING VEHICLE.

1 2 3 4 5

Page 1 657080 ’63-’82 Corvette Manual Rack & Pinion Kit Instructions # 8001520 Full refund will NOT be granted to any kits that are damaged,

Page 2 657080 KIT CONTENTS: # Part Number Description Quantity 1 8001520 RACK & PINION UNIT W/BRACKET 1 2 8020940 M14 x 1.5 Outer Tie Rod End

Page 3 657080 Installation 1. First install the steering shaft, and U-joints. For best results, we recommend using one of our shaft kits. 8052110

Page 4 657080 3. Thread lock nuts and tie rod ends onto the inner tie rods. 4. Fasten tie rod ends to spindles and tighten locking nuts to 50 ft

Page 5 657080 Final Steps 7. Vehicle will need to be aligned properly after install. Align vehicle as close as you can and torque down tie rod jam

No comments

Unisteer 8001520 Corvette Manual Rack & Pinion Kit 1963 User Manual